ANTMINER T9, T9+

custom FIRMWARE (no Fee from mining!) for download

The Antminer T9 series is a line of Bitcoin mining hardware developed by Bitmain. The series was first released in 2018 and has since become one of the most popular Bitcoin mining ASICs on the market. The Antminer T9 and T9+ are both part of this series and offer different levels of performance and efficiency.

Antminer T9

The Antminer T9 was the first in the series and was released in 2018. It has a hash rate of 11.5 terahashes per second (TH/s) and consumes 1400 watts of power. The T9 is a relatively noisy miner and is not ideal for home use.

Antminer T9+

The Antminer T9+ was released in 2018 and is an improved version of the T9. It has a hash rate of 12.5 TH/s and consumes 1430 watts of power. The T9+ is slightly more efficient than the T9 and is also quieter.

Profitable Custom Firmware for Antminer T9, T9+

There is a modified firmware available for the Antminer T9 and T9+ that can increase the hash rate by up to 10%. However, this firmware may void the warranty and could damage the miner if not installed correctly.

Comparison

The following table compares the two miners in the Antminer T9 series:

Feature Antminer T9 Antminer T9+
Hash rate 11.5 TH/s 12.5 TH/s
Power consumption 1400 watts 1430 watts
Noise level Loud Moderate
Modified firmware Available Available
 
The Antminer T9 series is a popular choice for Bitcoin miners. The T9+ is the most efficient miner in the series and is also the quietest. However, it is also the most expensive. The T9 is the least efficient miner in the series, but it is also the cheapest.

Which Antminer T9 Series Miner is Right for You?

The best Antminer T9 series miner for you will depend on your individual needs and budget. If you are looking for the most efficient miner, the T9+ is the best option. If you are looking for a good compromise between performance and efficiency, the T9 is a good choice. If you are on a budget, the T9 is the least expensive option.

Profitable custom mining FIRMWARE T9 for download

1) DONATE ANY AMOUNT

Please donate any amount. It is all what you pay for it! This firmware is without any mining fee!

ETH or USDT adress for donating:
0x6E5f24D2097be972B8DE5B5248b81C8F86F081Db
 
SOL (Solana) adress for donating:
3zPJvhKSVh91JvQdyccBCNCMVMGGScZRixxoNvaYhmB5
 
LTC (Litecoin) adress for donating:
LhDUyFq5EEhDnqWFmYoTkfnaeasV7kjAXX

 
BTC Adress for Donating: bc1qfu6y0u2denshwy8lucn7q6t9mdhtyvmjucnavq
QR BTC Donate

DONT forget add your e-mail in the notes to the transaction or email me bigminer2019@gmail.com

 

  

2) You will receive URL

After donating of any BTC amount you will receive open URL for downloading your Firmware

 Donation first, Download firmware after 

 

  

3) Download and upgrade

After downloading the Firmware file you can instal it on your miner machine and Enjoy Best firmware ever without mining fee!

  

 

Specification of Firmware

for Antminer T9, T9+

 

  • Custom firmware for: Bitmain Antminer T9, T9+ (all versions)
  • Version: 2.3 (Firmware by BigMiner, Without Fee from mining!)
  • Efficiency: 20-25% (Better then Blissz firmware, Better then AsicFW.io)
  • UnOfficial Bitmain Firmware for Antminer T9, T9+ from BigMiner
  • Download the custom firmware T9+, T9. (dont unpack it)
  • Flash by going to "System" -> "Upgrade" -> "Flash new firmware image" and select the custom firmware.
  • After flashing, check the advanced settings page and start at the lowest voltage setting.
  • From there increase your frequency to see how high you can go at the lowest voltage setting.
  • Start tweaking some more. See the profile suggestions below.

 

In case of any problems you can write to bigminer2019@gmail.com